Roof Replacement for Damaged Plywood in Norwood
Norwood, NJ
Project Photos
We recently replaced a roof in Norwood due to some damaged plywood. It was clear that the plywood in some areas was in bad shape and needed changing.
The Challenge
There was quite a bit of damaged plywood that had to be dealt with. Fixing this was essential to keep the roof safe and reliable.
The Solution
We pulled out the damaged plywood and put in new sheets where it was necessary. For the roof replacement, we used standard materials, just like you’d typically see on a shingle roof.
Materials Used
Architectural asphalt shingles Starter strip shingles Hip and ridge cap shingles Synthetic roofing underlayment Ice and water shield CDX plywood sheathing Roofing nails Sheathing nails Drip edge flashing Step flashing Chimney flashing Counter flashing Valley flashing Pipe boot flashing Roof vents / ridge vents Ridge vent end caps Bathroom exhaust roof vents (if applicable) Attic ventilation intake vents (if applicable) Roofing cement Exterior roofing sealant Fascia boards (if damaged) Soffit materials (if damaged) Gutter apron flashing Replacement pipe collars Dumpster / debris disposal bags
Frequently Asked Questions
You won't need a permit unless the entire roof sheathing is being replaced.
Usually, it takes about 1 to 3 days, depending on the roof size.
We go with asphalt shingles and add an ice and water barrier underneath for durability.
What the Homeowner Said
My daughter referred me to this company because they have a great experience and very professional and attentive to my concerns
More from Herts Roofing & Construction