Roof Replacement in Plainfield, NJ
Plainfield, NJ
We recently finished up a roof replacement in Plainfield, NJ. The job involved taking off the old roof and fixing some damaged decking underneath.
The Challenge
The homeowner called us because the roof had some serious problems. While we were up there, we noticed a few spots in the decking that needed replacing to make sure the new roof sits right.
The Solution
We got to work and wrapped up the roof replacement in just a few days. We replaced the damaged decking, which helped us create a solid base for the new roofing material.
Materials Used
Asphalt shingles — architectural, three-tab, or designer. Starter-strip shingles — installed along eaves and rakes. Hip and ridge cap shingles — finish hips and roof peaks. Synthetic underlayment or roofing felt — protection beneath shingles. Ice and water shield — waterproofing at vulnerable areas. Drip edge — metal edging along eaves and rakes. Valley flashing or valley membrane — based on the valley installation method. Step flashing — where the roof meets sidewalls. Apron and counterflashing — for walls and chimneys, as applicable. Pipe boots — seal around plumbing vent pipes. Ridge vents and intake vents — provide attic ventilation. Roofing nails — sized for the shingles and roof deck. Cap nails — secure underlayment. Roofing sealant or cement — compatible with the roofing system. Plywood or OSB roof decking — replace damaged sections. Decking nails or screws — secure replacement sheathing. Skylight flashing kits — if skylights are present. Ventilation baffles — where needed to keep soffit airflow clear.
Project Photos
Frequently Asked Questions
You don't need a permit for a roof replacement unless we're replacing the sheathing (plywood) across the whole roof.
Typically, a roof replacement takes 1 to 3 days, depending on the roof size.
For a shingle roof replacement, we usually use asphalt shingles and an ice and water barrier underneath.
More from Herts Roofing & Construction